Endesa CPO - Pol. Ind. El Prado is a charging station located in Lepe, Huelva. This charging station has a total of 3, of which 2 are fast charge connectors.
It was added on 15/12/2024and last updated on 15/12/2024.
We recommend that you consult the photos and comments posted by our community, as they provide useful information about the charger's condition. Once your charging session is over, you can add your own comments and photos to help other users and drivers decide where and how to charge their electric vehicle next time.
Endesa CPO - Pol. Ind. El Prado isn't the charging point you need, check at the bottom of the page for your nearest charging point under "nearest charging points" and you'll see a list of other electric vehicle charging points nearby, along with their location in a parking lot, above ground and their distance in KM.
In the charging station information section, you can view everything you need to charge your vehicle. The exact address of the charging point Endesa CPO - Pol. Ind. El Prado is available, as well as directions on how to get there, the price of charging at this point and instructions on how to easily charge your vehicle.
For real-time status of charging points in Lepe, Electromaps provides real-time charging point information in the application.
If this
Lepe charger isn't right for your car, there are other solutions. You can check out other chargers in
Lepe or travel to other cities such as
Huelva,
Punta Umbría,
Isla Cristina, as they are nearby and located in
Huelva.
COMMENTS
a carregar a 43kw com aplicacao da X way
Cómodo y sin problemas.
Carga perfectamente
Carregando sem problemas
bajarse y configurar la app de Endesa es un dolor, pero el cargador funciona perfectamente a 45 kw
cargando a 48kW
reparado - en marcha
He llamado al servicio de Endesa, los técnicos han hecho su trabajo, el cargador está en marcha otra vez, cargando a 48kW
el cargador está fuera de servicio desde por lo menos el 17/04. Sigue sin funcionar
Carregamento sem problemas
Sigue en mantenimiento
Estación en mantenimiento
La app no funciona, no tiene el QR el cargador y el número de serie no lo reconoce
Al llegar, aparecía como fuera de servicio por error de comunicación. Tras llamar al servicio de endess, se consiguió reiniciar el punto y pude iniciar la carga con la tarjeta rfid de Endesa X Way. Cargando "solo" a 43-44kW de potencia, supongo que por falta de preacondicionamiento de la batería.
Esta operativo
El cargador está fuera de servicio
En la app de Endesa x aparece "en mantenimiento" o lo que es lo mismo, ya veremos cuando lo arreglamos.
No funciona, ni con llavero ni.con la app de Endesa.
Enchufe CCS2
No ha funcionado. Todo parece bien pero cuando intento arrancar la carga dice que está en mantenimiento. El enchufe CC2.
Funciona bien. cargando un Tesla model 3, a 42 kW