COMCDONALDSPUENTEGENIL01 is a charging station located in Puente Genil, Córdoba. This charging station has a total of 4, of which 4 are fast charge connectors.
It was added on 14/12/2024and last updated on 14/01/2025.
We recommend that you consult the photos and comments posted by our community, as they provide useful information about the charger's condition. Once your charging session is over, you can add your own comments and photos to help other users and drivers decide where and how to charge their electric vehicle next time.
COMCDONALDSPUENTEGENIL01 isn't the charging point you need, check at the bottom of the page for your nearest charging point under "nearest charging points" and you'll see a list of other electric vehicle charging points nearby, along with their location in a parking lot, above ground and their distance in KM.
In the charging station information section, you can view everything you need to charge your vehicle. The exact address of the charging point COMCDONALDSPUENTEGENIL01 is available, as well as directions on how to get there, the price of charging at this point and instructions on how to easily charge your vehicle.
For real-time status of charging points in Puente Genil, Electromaps provides real-time charging point information in the application.
If this
Puente Genil charger isn't right for your car, there are other solutions. You can check out other chargers in
Puente Genil or travel to other cities such as
Córdoba,
Montilla,
Palma del Río, as they are nearby and located in
Córdoba.
COMMENTS
No funciona
no funciona
va perfecto cargando 150kw
Not working
Otro verano más, por tierras andaluzas; de camino al pueblo de la suegra. Funciona muy bien con la tarjeta RFID de Endesa. Punto muy estratégico, y recomendable, para los que como yo; van de camino a Priego, desde el puerto de Huelva.
Activado con tarjeta RFID. y cargando a 148 kw
Todo OK, carga maxima a 148 KW
No está operativo
Muy buen cargador. Rápido y fácil de usar.
Cargando a 105kw sin problema. Muy bien! Recomendable.
28 kw en 23 min …dale a 75kw//h o menos.
operativo
Funcionando. Lo único es que ha cargado a unos 130 durante 8 minutos. A partir de ahí ha bajado de golpe a 90. Según tengo entendido es posible que estás mangueras se sobrecalienten y por eso baje drásticamente el rendimiento.
ya funciona correctamente, tanto con app y tarjeta.
solo funciona con tarjeta, con app nada. Pero al menos funcionan.
Funciona la activación con Rfid
Según informa la app de Endesa X, en este momento hay dos conectores disponibles,uno es chademo y el otro es type2. Chademo con una potencia máxima de 50 kW, a 50 céntimos/kwh. Type 2 con una potencia máxima de 21 kW, a 45 céntimos/kWh.
comprobado. instalado pero sin funcionar.
Cambiado un reluciente PDR por un ridículo carga en destino pequeño, situado a ras de suelo con un type 2 y un schuko , y no veo el css2. Incredulidad
Con tarjeta rfid y chademo funcionando correcto pero cargando a un máximo de 21kWh
Funcionando bien el tipo 2
funcionando CCS sin problema
no funciona CCS y solo puedo cargar tipo2